Abyssoclase

From Subnautica Modding Wiki
Jump to navigation Jump to search

Abyssoclase is a Raw Material found exclusively in the Void Spikes below 800m, on the seabed of the various floating islands. It is used in Tank Walls and various depth upgrades.

Uses in Crafting

Fabricator

Abyssoclase.png×9Heat-Sealed Fabric.pngHeat-Sealed Fabric.pngSmart Polymer.pngArrow-right (1).pngFabricator.pngArrow-right (1).pngTank Wall.png
Synthetic Fibers.pngDiamond.png×4Abyssoclase.png×9Electrochemical Suit.pngElectrochemical Gloves.pngHeat-Sealed Fabric.pngHeat-Sealed Fabric.pngArrow-right (1).pngFabricator.pngArrow-right (1).pngReinforced Dive Suit.png

Modification Station

Prawn Suit Depth Module MK1.pngLithium.pngLithium.pngAbyssoclase.png×4Smart Polymer.pngSmart Polymer.pngSmart Polymer.pngArrow-right (1).pngModification Station.pngArrow-right (1).pngPrawn Suit Depth Module MK2.png
Seamoth Depth Module MK3.pngAbyssoclase.png×12Hull Plating.pngHull Plating.pngArrow-right (1).pngModification Station.pngArrow-right (1).pngSeamoth Depth Module MK4.png

Habitat Builder

Plasteel Ingot.pngAbyssoclase.pngLead.pngLead.pngFiber Mesh.pngArrow-right (1).pngHabitat Builder.pngArrow-right (1).pngReinforcement.png

Data Bank Entry

Abyssoclase
Abyssoclase Entry.png

In the deepest layers of the open ocean, where mineral-rich water expelled from thermal vents collects due to its greater density relative to ordinary seawater, the extreme pressure can force these minerals back out of solution.


Abyssoclase is one such mineral, formed when a small seed crystal - possibly quartz, diamond, or sulfur - is coated with successive layers of silcia deposits rich in Tellurium and other rare elements.


These deposits, due to the nature of the environment in which they form, are extremely dense, hard, and resistant to compressive forces. If integrated into another substrate, they can massively increase that material's mechanical strength.

Source: Scan Abyssoclase